moose.ca » Suzuki http://moose.ca Christopher Alexander's miscellaneous ramblings. Sun, 27 Jun 2010 02:04:16 +0000 en hourly 1 http://wordpress.org/?v=3.0.1 Brief Samurai/SJ-413/SJ-410 Chronology: what to look for when buying a SJ Suzuki http://moose.ca/brief-samuraisj-413sj-410-chronology-what-to-look-for-when-buying-a-sj-suzuki/ http://moose.ca/brief-samuraisj-413sj-410-chronology-what-to-look-for-when-buying-a-sj-suzuki/#comments Thu, 13 Feb 2003 05:00:00 +0000 Christopher
Some of this might be slightly incorrect (from memory, dates in particular). If anyone knows better feel free to comment below.]]> http://moose.ca/brief-samuraisj-413sj-410-chronology-what-to-look-for-when-buying-a-sj-suzuki/feed/ 1 Samurai Tub Body Work http://moose.ca/samurai-tub-body-work/ http://moose.ca/samurai-tub-body-work/#comments Mon, 14 May 2001 05:08:13 +0000 Christopher http://moose.ca/samurai-tub-body-work/feed/ 0 Sidekick Gearing http://moose.ca/sidekick-gearing/ http://moose.ca/sidekick-gearing/#comments Tue, 24 Apr 2001 03:45:10 +0000 Christopher
Here is a table that shows the various gearing combinations with this setup. Thanks to Mike Strickland for the template spreadsheet that he provided for this set of tables. These numbers are based on the following configuration:
Transmision 1st
3.652:1
Transmission 5th
0.865:1
Transfer Case Low
4.240:1
Axle Gears
5.89:1
Tires
35x12.5x15
]]> http://moose.ca/sidekick-gearing/feed/ 0 Samurai Rear Bumper http://moose.ca/samurai-rear-bumper/ http://moose.ca/samurai-rear-bumper/#comments Tue, 24 Apr 2001 03:43:02 +0000 Christopher
The design of the bumper had to meet several criteria:
*
   It has to be relatively easy to make
*
   It has to protect the back end of the truck as this part of the truck is prone to dragging when going over large irregular obstacles
*
   It has mount the orginal factory lights
*
   Has to be able to support/mount a rear winch
*
   should wrap around the back of the truck and act as nerf bars up to the back of the fender opening
*
   Needs to be easy to remove for maintenance
*
   Must _improve_ the rear departure angle
]]> http://moose.ca/samurai-rear-bumper/feed/ 0