Behind the XJ Dash

November 16, 2007
By Christopher

Here’s some images of what is behind the XJ dash. The images show that there is lot of room for mounting an LCD provided you pick the “right” one.

There is not a lot of equipment to get in the way of display placement once the OEM radio is removed. Some dremel tool work on the mounting brackets might be required.

behind_fascia

behind_fascia_2

The opening in the fascia itself is ~8″ x ~3″. Trimming can make the hole quite a bit larger with minimal bondo/figerglass work required.

fascia_horizontal

fascia_vertical

These images show the measurements in and around the OEM radio and HVAC controls.

1.5_DIN_vertical

DIN_horizontal

This entry was posted on November 16, 2007 at 1:12 pm and is filed under Jeep, Tech. You can follow any responses to this entry through the RSS 2.0 feed.

Leave a Reply